221 Records Returned 10 Records Displayed. << Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next >> Subcategories: Accessories | Aeroponics | Drip Systems/ Top Down  | Ebb & Flow | Grow Boxes & Machines | NFT | Propagation | Small Scale Systems   Click for More Info   "Y" Connector with Dual Shut-Off Converts one faucet to two separately controllable outlets. 3/4" female hose thread inlet x 3/4" male hose thread outlets. Product ID: XR_SPLITTER Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2' Hose Support Clamps For fastening 1/2" - 5/8" hose to posts, beams, decks, patios and walls. Black poly clamps molded to fit tubing or hose. Includes pre-inserted nail. Product ID: XR_50CLMPS Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2" Barbed Elbow Bending flexible tubing around your system will cause water flow problems. Use these elbows for sharp turns. For use with 1/2" hose . Water pressure to 30 PSI Product ID: XR_ELBOW Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2" Compression Hose End Cap This end cap seals off the end of your 1/2" tubing line. It provides a leak-proof seal. The green compression ring inside is the key to it working well. Product ID: 303G00U Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2" Double Barbed Connectors Join two lenghts of 1/2" Tubing. For water pressure up to 30 PSI Product ID: XR_X501TO1 Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2" Double Barbed Tee Establish branch circuits in your 1/2" tubing line. For use with 1/2" hose only. Up to 30 PSI. Product ID: XR_50TEE Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2" Male Pipe Thread x 3/4" Male Hose Thread Connects 1/2" female pipe thread to 3/4" female hose thread. Product ID: XR_ADAPT1 Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2" Male Pipe Thread x 3/4" Male Pipe Thread Connects 1/2" female pipe thread to 3/4" female pipe thread. Product ID: XR_ADAPT3 Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/2" Tubing Stakes Holds 1/2 tubing lines in place. Plastic stakes have an exclusive cleated design to hld lines decurely in place. 6" tall. Product ID: XR_Cleatstk Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     Click for More Info   1/4' Tubing Support Clamps - 15 pk Black poly clamps molded to fit tubing or hose. Includes pre-inserted nail. Great for fastening 1/4" tubing to posts, beams and stucco walls. Product ID: XR_X25CLMPS Category:  Hydroponic Systems-Accessories-Micro Irrigation Supplies     << Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next >>

© 2006 GreenCoast Hydroponics site design: practically dutch